Prof. Dr.-Ing. Uwe Glatzel
Lehrstuhl Metallische Werkstoffe
www.metalle.uni-bayreuth.de


Prof. Dr. rer. nat. Mathias Göken
Allgemeine Werkstoffwissenschaften
www.gmp.ww.uni-erlangen.de

Begutachtete Veröffentlichungen in internationalen Zeitschriften der Kollegiaten (Stand: Juli 2014, Berichtskolloquium)

Gedruckt bzw. angenommen

Pyrolysis of polyurethane by microwave hybrid heating for the processing of NiCr foams
Kangjian Wu, Ho-Seon Park, Monika Willert-Porada:
Journal of materials processing technology 212,  1481  - 1487.

Process development for ZrO2-ZrSiO4/NiCr functionally graded materials
Autor: Kangjian Wu
Dissertation, 2013

Pressureless sintering of ZrO2-ZrSiO4/NiCr functionally graded materials with a shrinkage matching process
Autoren: Kangjian Wu; Ho-Seon Park ; Monika Willert-Porada ; Sven Scheler (Lehrstuhl Keramik, Uni Bayreuth)
Elservier, in: Journal of the European Ceramic Society, Jg.:2013, Bd.:33, S.: 1111  - 1121

High-temperature oxidation behavior of ZrO2-ZrSiO4/NiCr composites and its applicability for functionally graded materials
Autoren: Kangjian Wu ; Andreas Rosin ; Ho-Seon Park ; Monika Willert-Porada ;
in: Journal of Physics: Conference Series, Jg.:2013, Bd.:419, S.:  2013  

High Temperature Behavior of Si3N4 and Yb2SiO5 Coated Carbon Fibers for Silicon Nitride CMC
Autoren: - P. Pontiller, M. Willert-Porada
Publisher: Advanced Engineering Materials
DOI: 10.1002/adem201300443, Seiten: 1-9, Jahr: 2013

Laser-Assisted Microwave Plasma Processing of Ceramic Coatings
Autoren: M. Willert-Porada ; P. Pontiller-Schymura ; H. Park ; A. Rosin
Publisher: Journal of Ceramic Science and Technology
Volume: 4 (1), Seiten: 1-10, Jahr: 2013

Interpenetrating Network Metal-Ceramic FGM - Preparation and Properties
Autoren: Neukam M.; Willert-Porada, M.
Publisher: Materials Science Forum (Multiscale, Multifunctional and Functionally Graded Materials)
Volume: 631-632, Seiten: 471-476, Jahr: 01/2010

Synthesis of porous silicon nitride ceramic with a compositional Gradient
M. Knoll,
M. Willert-Porada
Materials Science Forum Vols. 631-632 (2010) pp 477-482. doi:10.4028/www.scientific.net/MSF.631-632.477

Interpenetrating Network Metal-Ceramic FGM – Preparation and Properties
M. Neukam
, M. Willert-Porada
Materials Science Forum, 2010. 631-632: p. 471-476.

Three-dimensional Printing of Complex Shaped Alumina/Glass Composites
W. Zhang
, R. Melcher, N. Travitzky, R.K. Bordia, P. Greil
Adv. Eng. Mat., adem. 200900213, angenommen am 16.07.2009

Development of Ultra-High Temperature Stable Ceramics by Reactive Infiltration Processes
R. Voigt
, W. Krenkel, A. Can und G. Motz
Ceram. Trans., angenommen am 31.07.2009

Generation of ceramic layers on transition metals via reaction with SiCN-precursors
C. Delpero
, W. Krenkel, G. Motz
Ceramic Transactions, eingereicht am 06.08.09

Determination of Phases in the System Chromium-Platinum (Cr-Pt) and ThermodynamicCalculations
J. Preußner
, S. Prins, Z.-K. Liu, R. Völkl, U. Glatzel
Materials Science and Engineering A, Vol. 510-511, pp. 322-327, 2009

A Dislocation Density Based Material Model to Simulate the Anisotropic Creep Behavior of Single Phase and Two-Phase Single Crystals
J. Preußner
, Y. Rudnik, H. Brehm, R. Völkl, U. Glatzel
International Journal of Plasticity, Vol. 25, pp. 973-994, 2009

Development of a precipitation strengthened Pt base superalloy
R. Völkl, M. Wenderoth, J. Preussner, S. Vorberg, B. Fischer, Y. Yamabe-Mitarai, H. Harada, U. Glatzel

Materials Science & Engineering A, Vol. 510–511, pp. 328–331, 2009

Metallic Materials for Structural Applications Beyond Nickel-based Superalloys
M. Heilmaier, M. Krüger, H. Saage, J. Rösler, D. Mukherji, U. Glatzel, R. Völkl, R. Hüttner, G. Eggeler, Ch. Somsen, T. Depka, H.-J. Christ, B. Gorr, S. Burk
Journal of Metals – JOM, Vol. 61(7), pp. 61-76, July 2009.

Electron energy losses by channelling-enhanced microanalysis in a γ′-strengthened Ni-base alloy with Ti additions
C. H. Liebscher, R. Voelkl, U. Glatzel

Acta
Materialia, Vol. 57, pp. 4217-4223 (2009)

Reactive hot pressing and properties of Nb2AlC
W. Zhang
, N. Travitzky, C.F. Hu, Y.C. Zhou, P. Greil
J. Am. Ceram. Soc., angenommen am 01.05.2009, veröffentlicht online: 23. Juni 2009.
Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys
R. Rettig
, A. Heckl, S. Neumeier, F. Pyczak, M. Göken, R.F. Singer
Defect and Diffusion Forum 289-292 101-108 (2009)
First creep results on thin walled single-crystal superalloys
R. Hüttner
, J. Gabel, U. Glatzel, R. Völkl
Materials Science & Engineering A, Vol. 510–511, pp. 307–311, 2009
Development of MgAl2O4 spinel coating on graphite surface to improve its waterwettability and oxidation resistance
A. Saberi, F. Golestani-Fard, H. Sarpoolaky, M. Willert-Porada, T. Gerdes, R. Simon, C. Liebscher
Ceramics International, Vol. 35, pp. 457–461 (2009)
A novel approach to synthesis of nanosize MgAl2O4 spinel powder through sol–gel citrate technique and subsequent heat treatment
A. Saberi, F. Golestani-Fard, M. Willert-Porada, Z. Negahdari, C. Liebscher, B. Gossler

Ceramics International, Vol. 35, pp. 933-937 (2009)
Influence of lattice misfit on the internal stress and strain states before and after creep investigated in rhenium and ruthenium containing nickel-base superalloys
F. Pyczak, S. Neumeier, M. Göken
Materials Science & Engineering A, Vol. 510–511, pp. 295–300, 2009
Formation of NbAl3/Al2O3 composites by pressure less reactive infiltration
W. Zhang
, N. Travitzky, P. Greil
J. Am. Ceram. Soc., 91 (9) 3117-3120 (2008)
High-temperature behavior of platinum group metals
J. Preußner
, R. Völkl, U. Glatzel
Platinum Metals Review, 52 (4) 241-242 (2008)
Building a Thermodynamic Database for Pt-based Superalloys: Part III
J. Preußner
, S.N. Prins, M. Wenderoth, R. Völkl, U. Glatzel
Platinum Metals Review, 52 (4) 48-51 (2008)
Atomic site location by channelling enhanced microanalysis (ALCHEMI) in γ’-strengthened Ni- and Pt-base alloys
C. H. Liebscher
, J. Preussner, R. Voelkl, U. Glatzel
Acta
Materialia, Vol. 56, pp. 4267–4276 (2008)
Mechanism of the Formation of Amorphous Gold Nanoparticles within Spherical Polyelectrolyte Brushes
M. Schrinner, F. Polzer, Y. Mei, Y. Lu, B. Haupt, M. Ballauff, A. Grödel, M. Drechsler, J. Preußner, U. Glatzel
Macromolecular Chemistry and Physics, Vol. 208 (2007), 1542-1547
Overview of the development of new Pt-based alloys for high temperature application in aggressive environments
L.A. Cornish, R. Süss, R. Völkl, M. Wenderoth, S. Vorberg, B. Fischer, U. Glatzel, A. Douglas, L.H. Chown, T. Murakumo, J. Preussner, D. Lupton, L. Glaner, N.B. Maledi, J.H. Potgieter, M. Sephton, G. Williams
Journal of The South African Institute of Mining and Metallurgy 107 (11) 697-711 (2007)
Building a database for the prediction of phases in Pt-based superalloys
L.A. Cornish, R. Süss, A. Watson, J. Preussner, S.N. Prins, M. Wenderoth, R. Völkl, U. Glatzel
Journal of The South African Institute of Mining and Metallurgy, 107 (11) 713-724 (2007)
3D-Printing of Al2O3/Cu-O composites
R. Melcher,
W. Zhang, N. Travitzky, P. Greil
Ceramic
Forum International (Berichte der Deutscher Keramischen Gesellschaft) SpecialEdition-Rapid Prototyping, 83 (13) 18-22 (2006)

Mikrowellen-unterstützte Herstellung von TiO2 und Gd2O3 Nanopartikeln und deren Charakterisierung
Autoren: A. Müller, C.S. Karthikeyan, M. Neukam and M. Willert-Porada
Publisher: Materialwissenschaft und Werkstofftechnik
Volume: 37 (4), Seiten: 298-300, Jahr 04/2006

Finite Element Modeling of Anisotropic Single Crystal Superalloy Creep Deformation Based on Dislocation Densities of Individual Slip Systems
J. Preussner
, Y. Rudnik, R. Völkl, U. Glatzel
Zeitschrift für Metallkunde, Vol. 96 (2005), 595-601

Eingereicht

Influence of Temperature on the Thickness of Ultra-Thin Glass Films (submitted)
Glass Technology - European Journal of Glass Science and Technology Part A
Kanat Kyrgyzbaev, Andreas Rosin, and Monika Willert-Porada
Chair of Materials Processing, University of Bayreuth, Germany

Influence of Rhenium and Ruthenium on the Local Mechanical Properties of the γ and γ' Phase in Nickel-Base Superalloys
S. Neumeier
, F. Pyczak, M. Göken
Scripta
Mat., eingereicht am 25.09.2009
Modelling and Analysis of the Oxidation Influence on Creep Behavior of Thin-Walled Structures Based on the Single Crystal Nickel-Base Superalloy René N5 at 980°C
M. Bensch
, J. Preußner, R. Hüttner, G. Obigodi, S. Virtanen, U. Glatzel
Acta
Materialia, eingereicht am 28.08.2009
Microstructural and micromechanical characterization of Pt-Al-Cr-Ni-Re alloy by transmission electron microscopy and nanoindentation
E. Nikulina
, K. Durst, M. Göken, R. Völkl, U. Glatzel
International Journal of Materials Research, eingereicht am 21.08.2009
Measurement of the lattice misfit of Pt-Al-Cr superalloy by convergent beam electron diffraction (CBED)
E. Nikulina
, R. Völkl, U. Glatzel
International Journal of Materials Research, eingereicht am 23.08.2009
Solidification characteristics and segregation behaviour of nickel-base superalloys in dependence of different rhenium and ruthenium contents
A. Heckl
, R. Rettig, R.F. Singer
Met. Mater. Trans. A, zweite Einreichung am 10.09.2009
Modelling and Analysis of the Oxidation Influence on Creep Behavior of Thin-Walled Structures Based on the Single Crystal Nickel-Base Superalloy René N5 at 980°C
M. Bensch, J. Preußner, R. Hüttner, G. Obigodi, S. Virtanen, U. Glatzel
Acta
Materialia, eingereicht am 28.08.2009
Oxidation Behavior of the single crystalline Ni-base Superalloy PWA 1483 and some Ni-Cr-X model alloys in air at 800°C
G. Obigodi
, S. Virtanen
Oxidation of Metals, eingereicht am.11.07.2009
Enrichment of boron at grain boundaries of platinum-based alloys determined by electron energy loss spectroscopy in a transmission electron microscope
J. Preußner
, E. Fleischmann, R. Völkl, U. Glatzel
International Journal of Materials Research, eingereicht am 13.08.2009

Ausgewählte Tagungsbandbeiträge der Kollegiaten

Synthesis of Porous Silicon Nitride Ceramic with a Compositional Gradient
Autoren: Knoll M.; Willert-Porada, M.
Publisher: Materials Science Forum (Multiscale, Multifunctional and Functionally Graded Materials)
Volume: 631-632, Seiten: 477-482, Jahr 01/2010

Entwicklung von Ultrahochtemperatur-beständigen Karbidkeramiken
R. Voigt
, W. Krenkel und G. Motz
Verbundwerkstoffe – 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, W. Krenkel (Hrsg), 2009, 292-298
High Temperature Oxidation of some 2nd-Generation Single Crystal Ni-base Superalloys at 1000 °C in air and moisture
G. Obigodi
, S. Virtanen and B. Gleeson
Proc. Eurocorr 2009, Nice, France

Processing of Open Cell Nickel-Chromium and P/M Nickel-base Superalloy Foams
Autoren: Neukam M.; Willert-Porada, M.
Publisher: Euro PM 2008: PM Lightweight & Porous Materials: Proceedings of the International Powder Metallurgy Congress & Exhibition, Volume: 2, Jahr: 10/2008 (Konferenzbeitrag)

Interpenetrating Network Metal-Ceramic FGM - Preparation and Properties
Autoren: Neukam M.; Willert-Porada, M.
Publisher: Proceeding of the 10th International Symposium on Multiscale, Multifunction & Functionally Graded Materials, Sendai, Japan, Jahr: 09/2008

Processing Method for Interpenetrating Network Metal-Ceramic Composites with a Non-Linear Compositional Gradient
Autoren: Neukam M.; Willert-Porada, M.
Publisher: Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II: Ceramic Engineering and Science Proceedings, Volume: 29 (9), Jahr: 01/2008 (Konferenzbeitrag)

Material development and processing of multiscale structured ceramics for SOFC electrodes
M. Neukam
, M. Pannerselvam, M. Willert-Porada
AIP Conference Proceedings, 973 (Multiscale and Functionally Graded Materials), 748-753 (2008)
Processing Method for Interpenetrating Network Metal-Ceramic Composites with a Non-Linear Compositional Gradient
M. Neukam, M. Willert-Porada
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II: Ceramic Engineering and Science Proceedings, Ohji, T. and Singh, M (Hrsg.), Wiley-VCH, 29 (9) (2008), 43-51

Influence of green part microstructure and sintering atmosphere on the formation of porous silicon nitride ceramics with Yb-silicate matrix
Autoren: Knoll M.; Willert-Porada, M.
Publisher: Proceedings of 32nd International Conference & Exposition on Advanced Ceramics & Composites 2008, Daytona Beach, USA, Jahr 01/2008, (Konferenzbeitrag)

Influence of green part microstructure and sintering atmosphere on the formation of porous silicon nitride ceramics with Yb-silicate matrix
M. Knoll
, M. Willert-Porada
Proc. 32
nd International Conference & Exposition on Advanced Ceramics & Composites 2008, Daytona Beach, USA, Advanced processing and manufacturing technologies for structural and multifunctional materials II, Ceramic engineering and science proceedings ; Vol 29., Issue 9, S. 63-71, 2008; Editors: Tatsuki Ohji, Mrityunjay Singh; Hoboken, NJ, Wiley, 2009

High Temperature Stable Porous Ni Base Alloy Zirconia Composites with Interpenetrating Network (IPN) Structure
Autoren: B. Bergmann ; M. Neukam ; M. Willert-Porada
Publisher: Proceedings of the 17th Plansee Seminar, RM 87, Jahr: 05/2009

Creep behavior of thick and thin walled structures of a single crystal nickel-base superalloy at high temperatures - experimental method and results
R. Hüttner, R. Voelkl, J. Gabel, U. Glatzel
Proceedings of the 11
th International Symposium on Superalloys, eds. R. C. Reed et al. (Warrendale, PA: The Minerals, Metals and Materials Society, 2008) 719-723 (2008)
The influence of ruthenium and rhenium on the local properties of the γ- and γ '-phase in nickel-base superalloys and their consequences for alloy behavior
S. Neumeier
, F. Pyczak, M. Göken
Proceedings of the 11th International Symposium on Superalloys, eds. R. C. Reed et al., (Warrendale, PA: The Minerals, Metals and Materials Society, 2008) 109-119 (2008)

Coated Porous Silicon Nitride-Yb-Silicate Ceramics for High Temperature Applications
Autoren: Knoll M.; Willert-Porada, M.
Publisher: Materials Science and Engineering Congress and Exhibition on Advanced Materials and Processes, 2008 Nürnberg, Jahr: 09/2008, (Konferenz Beitrag)

Platinum alloy development - the Pt-Al-Cr-Ni system
J. Preussner
, M. Wenderoth, S. Prins, R. Völkl, U. Glatzel
Proc. 2. Int. Platinum Conference, Oct. 2006, Sun City, South Africa (2006), 103-107.

Rare earth Silicate based Environmental Barrier Coating on Silicon Nitride ceramics
Autoren: Z. Negahdari, P. Pontiller, M. Willert-Porada
Functionally Graded Materials, FGM, Guimaraes, Jahr: 2010 (Konferenzbeitrag)

“Material Development and Processing of Multiscale Structured Ceramics for SOFC-Electrodes”
Autoren: Neukam M.; Pannerselvam M.; Willert-Porada, M.
Publisher: Mini-Symposia "Functionally Graded Structures for Galvanic Cells", FGM 2006 Conference, Hawaii; ISBN 978-0-7354-0492-2/ ISSN 0094-243X
Volume: 973, Seiten: 973, Jahr 10/2006 (Konferenzbeitrag)

Influence of the carbon fiber treatment for the synthesis of C-fiber-reinforced Silicon Nitride ceramics
Autoren: P. Pontiller, E. Fuchs, Z. Negahdari, M. Willert-Porada
Material Science Engineering, Darmstadt, Jahr : 2010, (Poster)

Porous, tough and oxidation-stable Si3N4-Ceramic
Autoren: P. Pontiller
38. Arbeitskreis „Verstärkung keramischer Werkstoffe“, Bremen
Jahr: 2011, (Konferenzbeitrag)

New Material and Processing Concept for Si3N4 Ceramics
Autoren: P. Pontiller, Z. Negahdari, M. Willert-Porada
Deutsche Keramische Gesellschaft DKG-Jahrestagung, Nürnberg
Jahr: 2012, (Poster)

New material and processing concept for Si3N4 ceramics
Autoren: P. Pontiller
Ceramic Materials and Components for Energy and Environmental Applications, CMCEE,Dresden
Jahr: 2012, (Konferenzbeitrag)

Optimization of Heating for a High Speed Rotating Cup by Means of Multiphysics Modeling
K. Kyrgyzbaev, A. Rosin, and M. Terock
Chair of Materials Processing, University of Bayreuth, Bayreuth, Germany
14th Seminar "Computer Modeling in Microwave Engineering and Applications", March 5-6, 2012, University of Bayreuth, Bayreuth, Germany

Influence of Temperature on the Thickness of Ultra-Thin Glass Films
Kanat Kyrgyzbaev, Andreas Rosin, Thorsten Gerdes, Monika Willert-Porada
Chair of Material Processing, University of Bayreuth, Bayreuth, Bayern, Germany
11th ESG Conference, 3 – 6 June, 2012, Maastricht, Netherlands

Begutachtete Veröffentlichungen in internationalen Zeitschriften assoziierter Mitglieder

Gedruckt bzw. angenommen

Development of Novel Functionally Graded Al2O3-Lanthanum Hexaaluminate Ceramics for Thermal Barrier Coatings
Negahdari, Z.   Willert-Porada, M.         Scherm, F.
Materials Science Forum (Multiscale, Multifunctional and Functionally Graded Materials)            631-632            97-102 
2010     Januar

Microwave Hybrid Post-Heat Treatment of Reaction Sintered Alumina/Lanthanum Hexaaluminate Composite Ceramics
Negahdari, Z.   Willert-Porada, M.
Advanced Engineering Materials           "12,  No  3"       216-221           
2010     März

Mechanical Properties of dense to porous alumina/lanthanum hexaaluminate composite ceramics
Negahdari, Z.   Willert-Porada, M.         Pfeiffer, C.
Materials Science and Engineering: A, Bd.:527,             12        Page: 3005-3009          
2010     Januar

On the role of eutectics during recrystallization in a single crystal nickel-base superalloy - CMSX-4
L. Wang
, F. Pyczak, J. Zhang, R.F. Singer
International Journal of Materials Research, 100 (2009), DOI 10.3139/146.110155
Microstructure Tailored Functionally Graded Alumina/Lanthanum Hexaaluminate Ceramics for Application as Thermal Barrier Coatings
Z. Negahdari
, M. Willert-Porada
Journal of Advanced Engineering Materials, angenommen 2009
Tailoring the microstructure of reaction sintered alumina/lanthanum hexaaluminate particulate composite
Z. Negahdari
, M. Willert-Porada
Journal of European Ceramic Society, angenommen 2009
Synthesis and characterization of nanocrystalline microwave dielectric LaAlO3 powder via sucrose method
Z. Negahdari
, A. Saberi, M. Willert-Porada
Journal of alloys and compounds, 2009, doi:10.1016/j.jallcom.2009.05.102
Particle-filled PHPS silazane-based coatings on steel
M. Günthner
, T. Kraus, A. Dierdorf, D. Decker, W. Krenkel, G. Motz
Int. J. Appl. Ceram Technol 2009;6:373-380.
Advanced coatings on the basis of Si(C)N precursors for protection of steel against oxidation
M. Günthner
, T. Kraus, A. Dierdorf, D. Decker, W. Krenkel, G. Motz
J. Europ. Ceram. Soc. 2009;29:2061-2068.
Mechanical Characterisation of Interpenetrating Reinforced Metal Matrix Composites
F. Scherm
, R. Völkl, A. Neubrand, F. Bosbach, U. Glatzel
Materials Science and Engineering A, angenommen am 14.08.2009
Determination of the temperature rise within UHMWPE during tribological loading
M.C. Galetz
, T. Uth, P. Adam, M. Wimmer, U. Glatzel
Acta Biomat 2009, angenommen am 16.06.09
Development of Novel Functionally Graded Al2O3-Lanthanum Hexaaluminate Ceramics for Thermal Barrier Coatings
Z. Negahdari
, M. Willert-Porada, F. Scherm
Mater. Sci. Forum, Vols. 631-632 (2010), 97-102
Si3N4/SiC Materials Based on Preceramic Polymers and Ceramic Powder
U. Degenhardt
, W. Krenkel, G. Motz, F. Stegner, K. Berroth, W. Harrer, R. Danzer
Ceram. Trans., angenommen am 22.07.2009
Microstructural characterization of interpenetrating light weight metal matrix composites
F. Scherm
, R. Völkl, S. van Smaalen, S. Mondal, P. Plamondon, G. L’Espérance, F. Bechmann, U. Glatzel
Materials Science & Engineering A, Vol. A518, pp. 118-123, 2009
Diffusion brazing of single crystalline nickel base superalloys using boron free nickel base braze alloys
P. Heinz
, A. Volek, R.F. Singer, M. Dinkel, M. Göken, F. Pyczak, M. Ott, E.E. Affeldt, A. Vossberg
Defect and Diffusion Forum, 273-276, 294-299 (2008)
Monotonic and cyclic deformation behaviour of ultrafine-grained aluminium
J. May, D. Amberger, M. Dinkel, H.W. Höppel, M. Göken

Materials Science and Engineering A, 483-484 (1-2 C), 2008, pp. 481-484
XRD profile analysis characterization of ultrafine grained Al-Mg alloys
M. Dinkel
, F. Pyczak, J. May, H.W. Höppel, M. Göken
Journal of Materials Science, 43 (23-24), 2008, pp. 7481-7487
Hardening and thermal stability of nanocrystalline AlMg4.8 powder
M. Hüller, J. Vlcek, M. Dinkel, H.W. Höppel, M. Göken
Philosophical Magazine, 88 (8), 2008, pp. 1209-1226.
Influence of recrystallization on the high temperature properties of a directionally solidified Ni-base superalloy
G. Xie, L. Wang, J. Zhang, L.H. Lou

Metallurgical and Materials Transactions A, 39 (2008), S. 206-210.
Mechanical properties, dislocation density and grain structure of ultrafine-grained aluminum and aluminum-magnesium alloys
J. May, M. Dinkel, D. Amberger, H.W. Höppel, H.W., M. Göken

Metallurgical and Materials Transactions A, 38 A (9), 2007, pp. 1941-1945
Hysteretic heating during cyclic loading of ultra high molecular weight polyethylene
M.C. Galetz
, C. Goetz, P. Adam, U. Glatzel
Adv Eng Mat 2007;9:1089-1096.
Carbon Nanofibre Reinforced Ultrahigh Molecular Weight Polyethylene for Tribological Applications
M.C. Galetz
, T. Blaß, H. Ruckdäschel, J.K.W. Sandler, V. Altstädt, U. Glatzel
Journal of Applied Polymer Science 2007;104: 4173–4181.
•; Polymeric and ceramic-like coatings on the basis of SiN(C) precursors for protection of metals against corrosion and oxidation
M. Günthner
, Y. Albrecht, G. Motz
Cer Eng Sci Proc, Eds Wereszczak A, Lara-Curzio E 2007; 3: 277-284.
Microwave Enhanced Anisotropic Grain Growth in Lanthanum Hexa Aluminate–AluminaComposites
Z. Negahdari
, T. Gerdes, and M. WillertPorada
Mechanical Properties and Performance of Engineering Ceramics and Composites III, Volume 28, Issue 2, p 15–21 2007
Microwave–material interaction in oxide ceramics with different additives
M. WillertPorada, Z. Negahdari, T. Gerdes, A. Muller, M. Paneerselvam

Advances in Science and Technology, Trans Tech Publications, Vol. 45, p 845–850, 2006

Eingereicht

Abrasion Resistance of Oxidized Zirconium in Comparison with CoCrMo and Titanium Nitride Coatings for Artificial Knee Joints
M.C. Galetz, E. Fleischmann, C. Konrad, A. Schuetz, U. Glatzel
Eingereicht
: Journal of Biomedical Materials Research Part B: Applied Biomaterials
Potential Molecular Deformation Mechanisms in UHMWPE during Tribological Loading in Artificial Joints
M.C. Galetz, , U. Glatzel
Tribology
Letters, eingereicht am 31.08.2009
Potential for Adhesive Wear in Friction Couples of UHMWPE Running against Oxidized Zirconium, Titanium Nitride Coatings and Cobalt-Chromium Alloys
M.C. Galetz
, S. Dietel, B. Theile, U. Glatzel
Journal of Biomedical Materials Research Part B: Applied Biomaterials, eingereicht am 10.12.2008

Ausgewählte Tagungsbandbeiträge assoziierter Mitglieder

New Boron and Silicon Free Single Crystal-Diffusion Brazing Alloys
M. Dinkel
, P. Heinz, F. Pyczak, A. Volek, M. Ott, E.E. Affeldt, A. Vossberg, M. Göken, R.F. Singer
Superalloys 2008, Proc. of 10
th Int. Symp. on Superalloys, edited by: R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron und S.R. Woodard. (Warrendale, PA: Proc. Superalloys 2008), 211-220 (2008)
Eigenschaften und Anwendungen polymerer und keramikartiger Schichten auf Polysilazanbasis
G. Motz, M. Günthner
in: Beschichtungstechnik, Tagungsband zum 11. Werkstofftechnischen Kolloquium, TU Chemnitz, Ed. B. Wielage (2008), 200-208

BN-filled preceramic polymers as barrier coatings on steel
O. J. U. Flores, M. Günthner, W. Krenkel, G. Motz
International Symposium for Research Scholars on Metallurgy, Materials Science & Engineering (ISRS-2008), 10.-12. December, IIT Madras, Chennai, India (2008)

Nanoindentation and orientation measurements in single crystalline brazing joints of nickel-base superalloys
M. Dinkel
, F. Pyczak, M. Göken, P. Heinz, A. Volek, R.F. Singer, M. Ott, E.E. Affeldt, A. Vossberg
Proc. Materials for Advanced Power Engineering, Liège, Belgien, (2006) S. 633

Polyol process for the synthesis of LiFePO4 rhombohedral particles     
Singh, M.            Willert-Porada, M.
Proceedings of the World Congress on Particle Technology WCPT6,  ISBN 978-3-00-030570-2   
2010      April

Polyol synthesis of lithium titanium phosphate nanoparticles for Li-ion conductive solid electrolyte
Singh, M.            Bouazza, S.         Willert-Porada, M.                                                        
Proceedings of the first international conference on materials for energy, ISBN/ISSN/ISMV Nummer: 978-3-89746-117-8,  2010                                          

Low Temperature synthesis of LiFePO4 nanoplates and their electrochemical properties
Singh, M.            Willert-Porada, M.                                                                       
Proceedings of the first international conference on materials for energy, ISBN/ISSN/ISMV Nummer:978-3-89746-117-8, 2010